|
 The
specially designed pouring buck (which is provided to the contractor
at no cost when using the Precise Window exclusively) forms a 7/8" offset in the
wall opening. The offset, combined with the window flange, creates a positive seal against
water infiltration. Both the single and double glazed window will fit into the same
opening. This enables the home builder to determine the style of window right up to the
time of closing the home.
 Buck
hold-ups hold a standard pouring buck to the top of the wall. This is perfect for
the contractor that usually pours windows with concrete headers but occasionally needs to
pour a window at the top of the wall.
Lintel cones hold the pouring buck a
specified depth down in the wall to create a concrete header.
Tie Guides are used in those
circumstances where they are needed to hold the window buck into position for the
pour. They can be adjusted for optimal buck placement.
To install the window, simply place a bead of caulk around
the wall offset, slide the window into the opening, and screw the window into place with
the screws that are provided. Tapcons can be used in place of the screws and plugs
if so desired.
Installation is available in some areas! Check with your
local sales representative to see if installation is provided in your area.
 Window
installation has never been quicker or easier! The Precise Plastic Plugs
are placed into holes in the pouring buck before placing the buck into the wall.
After the pour, the body of the plug remains in the concrete for easy installation of
either the single or double glazed vinyl basement window. The Plastic Plug
eliminates the need to drill the concrete, which is a real time saver!!
These high quality Area Walls are made
from heavy duty 18 gauge galvanized steel. They feature a 3/4 inch profile with expertly
designed double-ribbed corners for added strength, reducing the need for extra bracing.
Available in multiple sizes including egress.
 The Area Wall Anchor attaches to the pouring buck before it's
placed into the wall. When the buck is stripped, the aluminum anchor remains in the wall
allowing the area wall to be bolted into place with standard bolts (which are included
with the anchor). The Anchor allows easy placement of the area wall without drilling or
nailing into the concrete, saving both time and money!! Special sizes require a minimum
quantity. Using the Area Wall Anchor, the area wall can be installed in just a few
minutes.
 The Safety Grate is strong enough to stand on, yet light
enough to push off for emergency escape. The safety grate shields windows from debris and
protects individuals from the accidental misstep.
The Precise Escape Ladder meets the
rigors required of an escape ladder plus the beauty of a quality crafted product. Our
escape ladder was designed to be the benchmark of the industry. Once installed, the ladder
blends in perfectly to enhance the appeal to the end user. It is easily installed on most
area walls. Simply drop the ladder into position and attach it to the area wall with
tapcons.
The Precise majestic 48" x 48" double glazed
slider window confirms to most Egress criteria. With the sash opened, but not
removed, there is a 20" x 42-13/16" opening, providing 5.95 square feet with a
clear opening of 20" wide.
Our Trim Kit allows you to finish the
interior with ease! The Precise Trim Kit allows you to finish off the interior of the
window without having to use lumber. The trim snaps into the window creating a finished
look with little cost or time. The kit is adjustable to fit different thickness walls.
|
